One DIYer Put Leanne Ford’s Signature Bathroom Update to the Test
Posted by admin on
At the end of 2020, while pregnant with her second child, Farah Prochaska was sitting at home binge-watching Home Again With the Fords (the HGTV series following Leanne Ford and her brother, Steve, as they help people move back to where they grew up) when she had an aha moment. “Leanne used Surecrete on so many of the projects, and every time I was like, I have to do this,” recalls Prochaska, a Utah-based design blogger and freelance stylist.
The textured wall treatment has become a signature of Ford’s. The designer first introduced us to the idea when she swathed her dated Los Angeles bathroom in the concrete coating (she applied it right on top of the old wall tile!). She has also been known to use it in husband Erik Allen Ford’s Buck Mason stores, one of which Prochaska visited while on a trip to L.A. “When I saw it in real life, I knew I could do it,” she says. As soon as she got back home, she followed through and transformed her kids’ builder-grade bathroom into a zen retreat (check out her full how-to here). Ahead, she shares what she learned from putting the pro’s famous method to the test.
The Supplies, FYI
- 2 to 3 bags of Surecrete WallSpray
- 1 bag of color per bag of cement (she used Whitewater)
- A 5-gallon bucket
- Electric drill
- Mixing paddle with a drill attachment
- Wide plastic drywall knife (it needs to be plastic so it can bend)
- Plastic sheeting
- Painter’s tape
- Sealer
- Paint tray
- Rubber gloves
- An extra pitcher of water
Do: Start With a Streamlined Slate
When Prochaska and her family moved into their home six years ago, she could tell it was newly renovated—and not in a good way but in the everything was from Home Depot way. She wanted to pare the whole space back, so she replaced the old all-in-one tub-shower with a new alcove bath. The rest of the walls were framed with waterproofing membrane, installed by a professional. She even removed the trim work around the window to keep the wall surfaces looking as sleek as possible.
Don’t: Leave the Premises Messy
Cover everything, notes Prochaska: the entire floor, switch plates, faucets, toilets. Of course, you can’t forget yourself. “I don’t even know how it happens, but your clothes get ruined,” she says. Create a drop station outside the door where you can take off your socks or coveralls on a plastic tarp so you don’t end up dragging debris through the rest of your house, creating another project for yourself.
Do: Prime!
When Prochaska watched Ford and her team use Surecrete on the show, she saw them apply it directly onto the desired service. But that, she quickly learned, was because they were usually covering something that was a similar gray or whitish hue. “From what I saw from TV, they would just smear it on and do one even coat,” she remembers. Prochaska tried to do the same, but partway through covering the shower, she realized that the bright red, waxy waterproof board was still peeking through. In an effort to hide it, she found herself applying way too much Surecrete and it all ended up looking like a thick mess. “I had done about 60 percent of the room and had to start over,” she says.
Accepting the loss, she sanded the walls down and chipped away at her first coating with a chisel. Once all of that was clear, she went over the walls with an all-purpose primer (two coats), which gave her a neutral, smooth canvas. “It was night and day,” she says.
Don’t: Start in the Center
Begin by applying the Surecrete around the top 8 inches of the room, closest to the ceiling, in a fanlike motion. Because you have to do some “crazy sideways maneuvers” in an effort to not get any Surecrete on your ceiling, you’ll end up with some drips and blobs further down on the wall, so it’s better to work your way down for the first bit. After that area is done, smooth out the drippings that have fallen and do a few random 1-by-1-foot swatches around the room. “This is the whitest your cement is going to be, so spread it around quickly before it dries,” notes Prochaska.
Do: Add Water as You Go
The mix is essentially half Surecrete, half colored powder, and one-quarter water. Once that’s all in the bucket, use your mixing paddle to stir everything until you get a pancake batter–like consistency, but keep the drill and mixer with you. When you notice that the material is getting too clumpy or sticking to itself, you’ll want to add a little bit of water and stir for a few minutes. Note: Every time you add water, it will slightly darken the mixture, which is why it’s key to do some random swipes throughout the room so the variation in tones looks natural.
Don’t: Stress About Cleaning It
It’s not Play-Doh, Prochaska assures: Surecrete is waterproof. The DIYer simply cleans her kids’ shower with a kitchen dish brush and clear dish soap and scrubs away. Just steer clear of tacky clothes that will catch on the dried, textured surface.
Do: Commit to the Aesthetic
The whole idea of Ford’s Surecrete trick is to give a space a spa-worthy, handmade touch, so don’t stop at the shower if there’s still a little more room in your budget. To complete her space, Prochaska replaced the old vanity cabinet with a floating one from IKEA, which her contractor mounted in the wall to support the new concrete sink (it weighs about 25 pounds) and the marble countertop. The asymmetrical mirror was a steal at $130.
In a full circle moment, Ford reached out to Prochaska over Instagram and asked where she got her matte black faucet (a genius Amazon find). “I wish I could have given her the link, but it sold out,” says Prochaska. The student has become the master.
The post One DIYer Put Leanne Ford’s Signature Bathroom Update to the Test appeared first on domino.